Removal the radiator grille (Chevrolet Lacetti J200)

The trim is made as a separate element on a car with a hatchback body, and on cars with sedan and station wagon bodies - together with the bumper. We carry out the work when removing the upper crossbar of the radiator frame or when the trim itself is damaged, to access the places where the headlights are attached and the radiator.



Using a Phillips screwdriver, unscrew the four screws securing the radiator trim.



Using a long slotted screwdriver, press on the plastic retainer of the lower trim mount on the left side of the car.

We pull the left side of the lining slightly towards ourselves.



The photo shows the retainer with the trim bracket already removed from it.





Similarly, having freed the right side of the trim, we remove it from the car. Note that the projections of the radiator trim come out of the bumper lugs.



To install the trim, you should first remove the plastic clips from the headlight brackets by squeezing their "ears" with your fingers



and then install the clips into the radiator grille brackets.

Next, we install the radiator trim in the reverse order.

[The text of the article was obtained from the website CHEVYMAN]