We remove the hood lock for flushing and lubrication in case of violations in its operation, as well as for replacement. We change the lock drive cable when it is jammed, pulled out or broken.
Head "10" unscrew the two bolts of the lock
and bring it out from under the upper cross member of the radiator frame.
We remove the tip of the cable sheath from the slot of the body
and the ball of the rope is from the hook of the lever.
To replace the hood latch cable
we release two pistons for fastening the cable sheath
and tie a soft stranded wire to it, which will help when laying a new cable.
Removing the lower trim of the instrument panel (see Removal of the bottom facing of the panel of devices).
We pull the cable into the interior of the car.
Disconnect the shell and the tip of the cable from the handle.
We tie the stranded wire to a new cable and stretch the cable into the engine compartment. Further assembly is carried out in the reverse order.