1. Remove the two hood lock mounting bolts...
2. ...and remove the lock.
3. Using a screwdriver, disconnect the cable end from the lock lever.
4. Press the end of the lock drive cable sheath out of the holder in the lock housing...
5. ...and remove the lock.
6. Remove the front door sill trim
7. Remove the lock drive cable housing from the holder on the handle bracket...
8. ...and disconnect the cable end from the handle lever.
9. Pull the cable end out of the passenger compartment through the hole in the body.
10. Remove the hood lock drive cable by removing it from the holders located at the top of the engine compartment.
11. Using a screwdriver, press the fasteners...
12. ... remove the hood lock drive handle.
13. Install all removed parts in the reverse order of removal.
(Information taken from the official website: «ChevyMan»)