1. Open the hood and place it on the support.
2. Mark on the windshield in any way (for example, with scotch tape) location of the right and left brushes in the initial position of the windshield wiper. This is necessary to ensure that the brushes operate in the required area of the windshield when reinstalled.
3. Use a screwdriver to pry up the edge of the decorative cap of the windshield wiper mounting nut...
4. ...and remove the plug.
5. Unscrew the lever mounting nut...
6. ...and remove the lever from the wiper linkage shaft.
7. Remove the second lever in the same way.
8. Install the levers in the reverse order of removal.