Car rear suspension Chevrolet Cruze 1

Features of the rear suspension design
The rear suspension is semi-independent, lever-spring with longitudinal levers 4 (Fig. 7.4), pivotally mounted on the car body and connected to each other by a...

Possible malfunctions of the rear suspension, their causes and methods of elimination
Cause of malfunction Method of elimination Noise and knocking in the suspension The shock absorber is faulty Replace the shock absorbers Loose shock absorber...

Replacing the rear shock absorber
You will need: wrenches "6", "15", "18", "21", "22", a wrench for wheel nuts. Warning: Shock absorbers (left and right) replace in pairs. Do not remove both...

Replacing the rear suspension spring
You will need: a 22 mm wrench and a spring compressor. Replace the spring if it is mechanically damaged or has significantly settled. Signs of settlement:...

Replacing the rear wheel hub
The hub is equipped with a long-life double-row radial thrust ball bearing, which does not require adjustment or lubrication during operation. However, vehicle...

Removal and installation the rear suspension beam
You will need: wrenches "15", "18", "21", a wrench for wheel nuts. It is more convenient to remove the rear suspension beam on a lift. If it is not possible to...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: