Car rear suspension Chevrolet Lanos 1

Rear suspension device
Rear suspension elements: 1 — beam; 2 - rubber cushion; 3 — beam lever; 4 - lower spring gasket; 5 — shock absorber; 6 - spring; 7 - Upper spring gasket; 8 —...

Removal the shock absorber
We remove the shock absorber if it loses its working properties, the silent block of the lower mount is destroyed or heavily worn, or the rubber cushions of...

Removal the spring
We remove the rear suspension springs when replacing them, replacing the lower and upper rubber spring pads, and removing the rear suspension beam. Springs...

Removal the rear anti-roll bar
We lift the rear of the car and remove the rear wheels. We unscrew the nuts securing the brackets that support the parking brake cables on the rear suspension...

Replacing the silent block of the beam lever
We replace the silent block of the lever if there are tears, bulges or separation of the rubber from the outer or inner bearings of the joint. The silent block...

Removal the rear suspension beam
We remove the beam for replacement in case of damage - cracks in the metal or deformation that has led to a violation of the installation angles of the rear...

Replacing rear wheel bearings
We carry out the work when the rear wheel bearings fail - a howling sound in the rear wheel area when the car is moving, play and noise when rotating the...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: