Car clutch repair Chevrolet Lanos 1

Clutch device
Clutch elements: 1 - gearbox housing; 2 — clutch release bearing; 3 — clutch release shaft; 4 — working cylinder; 5 - pressure plate; 6 — flywheel; 7 — slave...

Adjusting the Clutch Pedal Travel
We carry out the work when replacing the clutch pedal assembly or master cylinder, as well as when the clutch pedal travel does not meet technical...

Bleeding the clutch hydraulic drive
We bleed the clutch hydraulic drive to remove air from it after depressurization when replacing the master or slave cylinder of the clutch, tube, hose, as well...

Removal the clutch master cylinder
We carry out the work when replacing the master cylinder of the clutch hydraulic drive. Without pumping out the liquid, remove the expansion tank of the...

Removal the clutch hydraulic slave cylinder
We perform the work when replacing the working cylinder or its boot. Using a clamp, we pinch the hose that supplies the working fluid from the reservoir to the...

Removal the clutch release mechanism
We carry out the work when replacing the bearing or clutch release fork. To dismantle the drive mechanism, remove the gearbox (see Removal the gearbox ). In...

Replacing the clutch basket and driven disc
We remove the "basket" and the driven disk for replacement if they fail. we also remove the "basket" and the driven disk when replacing the flywheel and rear...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: