Car clutch repair Chevrolet Niva 1

Features of the clutch device
The clutch device is shown in Figure 3-1. Figure 3-1. Clutch assembly: 1 - clutch housing; 2 - flywheel; 3 - bolt securing the clutch housing to the flywheel;...

Possible malfunctions, their causes and methods of elimination

Bleeding the clutch hydraulic drive
Air in the clutch hydraulic drive is indicated by incomplete disengagement of the clutch, as well as "softness" and "failures" of the clutch pedal. To remove...

Removal and installation the clutch
Removal: First remove the gearbox (see " Transmission "). Loosen the bolts and remove the clutch housing assembly with the pressure plate. Do not lift this...

Checking the technical condition and checking the clutch
Checking the condition of the driven disk. Replace the driven disk assembly if the friction linings crack, the distance between the rivet head and the working...

Removal and installation the master and slave cylinders of the clutch release drive
First of all, drain the working fluid. To do this, put one end of the hose on the air release nipple 14 (see figure 3-2) working cylinder, and lower the other...

Disassembly, inspection, repair and assembly of the master and slave cylinders
Master cylinder. Unscrew the plug, remove the protective rubber cap 2 (figure 3-5) and retaining ring 3. This will allow you to remove piston 4, sealing ring...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: