Vehicle power and exhaust system Chevrolet Niva 1

Power supply system. General information
The fuel system is part of the electronic engine management system, which is described in detail in a separate Manual for repair and maintenance of the engine...

Fuel tank
Removal and installation. To remove the fuel tank 1 (figure 2-76) unscrew the filler pipe plug 12 and remove as much gasoline as possible. Remove the right and...

Gasoline vapor recovery system
Figure 2-77a. EURO-2 gasoline vapor recovery system: 1 - adsorber hose and fuel tank valve; 2 - fuel tank valve; 3 - gas tank valve hose, steam line; 4 -...

Main malfunctions of the gasoline vapor recovery system
Unstable idle speed, engine stalling, increased toxicity, and deterioration of the vehicle's driving performance may be caused by the following reasons: damage...

Removal the adsorber
Disconnect the wiring harness connector from the purge solenoid valve; Disconnect hoses 1 and 5 from the adsorber; Unscrew bolt 8, loosen the clamp and remove...

Installation of adsorber
Secure the adsorber with bracket clamp 9; Connect hoses 1 and 5 to adsorber 6; Connect the wiring harness connector to the purge solenoid valve.

Exhaust system
Exhaust gases are discharged from the engine through the exhaust manifold, the inlet pipe 15 (figure 2-78), neutralizer 13, additional muffler 12 and main...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: