Car rear suspension Chevrolet Aveo 2 (T300)
Features of the rear suspension design
Rear suspension semi-independent, lever-spring with longitudinal arms 3 (figure 7.4), hinged to the car body and connected to each other by a cross beam 1 of...
Rear suspension semi-independent, lever-spring with longitudinal arms 3 (figure 7.4), hinged to the car body and connected to each other by a cross beam 1 of...
Checking the technical condition of the rear suspension parts on the car
All checks and work should be carried out from underneath the vehicle, installed on a lift or inspection pit (with rear wheels hanging out). Find out if there...
All checks and work should be carried out from underneath the vehicle, installed on a lift or inspection pit (with rear wheels hanging out). Find out if there...
Replacing the rear shock absorber
You will need: keys "6", "15", "18". WARNINGS: Before raising the rear of the vehicle, engage first gear and chock the front wheels. Shock Absorbers (left and...
You will need: keys "6", "15", "18". WARNINGS: Before raising the rear of the vehicle, engage first gear and chock the front wheels. Shock Absorbers (left and...
Replacing the rear suspension spring
You will need: a 18 mm wrench and a mounting blade. Replace the spring if it is mechanically damaged or has significantly settled. Signs of settlement:...
You will need: a 18 mm wrench and a mounting blade. Replace the spring if it is mechanically damaged or has significantly settled. Signs of settlement:...
Replacing the rear wheel hub
You will need: 15 mm wrenches, TORX T30, wheel nut wrench. NOTE: The rear suspension hub is non-separable. If its bearing fails, the hub is replaced as an...
You will need: 15 mm wrenches, TORX T30, wheel nut wrench. NOTE: The rear suspension hub is non-separable. If its bearing fails, the hub is replaced as an...
Removal and installation the rear suspension beam
You will need: wrenches "10", "14", "21", a special wrench "13" for unscrewing the nuts of the brake pipes, pliers, a wrench for wheel nuts. USEFUL TIP: When...
You will need: wrenches "10", "14", "21", a special wrench "13" for unscrewing the nuts of the brake pipes, pliers, a wrench for wheel nuts. USEFUL TIP: When...
This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
See similar sections on Chevrolet cars:
Chassis: Rear suspension Chevrolet Cruze 1 (2008-2016)
Chassis: Rear suspension Chevrolet Lacetti 1 (2002-2009)
Chassis: Rear suspension Chevrolet Lanos T150 (2002-2009)
Chassis: Rear suspension Chevrolet Cruze 1 (2008-2016)
Chassis: Rear suspension Chevrolet Lacetti 1 (2002-2009)
Chassis: Rear suspension Chevrolet Lanos T150 (2002-2009)
Share information:
- General information
- Vehicle device
- User manual
- Main malfunctions
- Maintenance
- Power unit
- Engine
- Lubrication system
- Cooling system
- Supply system
- Exhaust system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Front wheel drives
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and trunk
- Security systems
- Electrical equipment
- Engine electrics
- Equipment and devices
- Heating and air conditioning
- Electrical circuits
- Manual
- Driver's workplace
- Salon equipment
- Vehicle characteristics
- Maintenance
- Engine 1.5 SOHC
- Engine repair
- Fuel supply system
- Control system
- Cooling system
- Engine 1.6 DOHC
- Engine repair
- Control system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Wheel drive
- Chassis
- Wheel suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- General information
- User manual
- Power unit
- Engine repair 1.5L SOHC
- Fuel system
- Control system
- Cooling system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Electrical circuits