Car steering Chevrolet Aveo 1 (T200)
The vehicle is equipped with a rack and pinion steering with hydraulic booster. The steering consists of the following elements: a steering mechanism with steering rods, a steering column with a steering wheel and an intermediate shaft that transmits torque from the steering column to the steering mechanism. For the convenience of the driver, a hydraulic booster is installed.
Steering device
The vehicle uses a rack and pinion steering system with hydraulic booster. The steering system consists of the following elements: a steering mechanism with...
The vehicle uses a rack and pinion steering system with hydraulic booster. The steering system consists of the following elements: a steering mechanism with...
Removal and installation the steering gear
Removal 1. Position and secure the vehicle on a two-post lift. 2. Set the wheels to the straight-ahead position. 3. Remove the wheels. 4. Disconnect the high...
Removal 1. Position and secure the vehicle on a two-post lift. 2. Set the wheels to the straight-ahead position. 3. Remove the wheels. 4. Disconnect the high...
Replacing the tie rod end on a car
Tie rod ends can be changed without removing the steering gear. Removal 1. Turn the steering wheel all the way towards the joint being removed. 2. Unscrew the...
Tie rod ends can be changed without removing the steering gear. Removal 1. Turn the steering wheel all the way towards the joint being removed. 2. Unscrew the...
Replacing steering rods with internal ball joint
The steering rods can be replaced without removing the steering gear, but to facilitate access to the elements and parts, it is recommended to remove the...
The steering rods can be replaced without removing the steering gear, but to facilitate access to the elements and parts, it is recommended to remove the...
Removal and installation the drive shaft-gear with the control valve
Removal 1. Remove the rack and pinion assembly from the vehicle. 2. Unscrew the protective threaded cap. 3. Holding the shaft, unscrew the lower nut. 4. Mark...
Removal 1. Remove the rack and pinion assembly from the vehicle. 2. Unscrew the protective threaded cap. 3. Holding the shaft, unscrew the lower nut. 4. Mark...
Removal and installation the rack and pinion mechanism
Removal 1. Remove the tie rod ends. 2. Remove the steering rods. 3. Remove the drive shaft-pinion assembly (see above). Note: The pinion shaft ball bearing...
Removal 1. Remove the tie rod ends. 2. Remove the steering rods. 3. Remove the drive shaft-pinion assembly (see above). Note: The pinion shaft ball bearing...
Removal and installation the power steering pump
The vane (slide) type power steering pump creates the pressure of the working fluid in the system, which is necessary to create an auxiliary force in the...
The vane (slide) type power steering pump creates the pressure of the working fluid in the system, which is necessary to create an auxiliary force in the...
Removal and installation the hydraulic fluid reservoir
Removal 1. Remove all liquid from the tank (for example, using a syringe). 2. Loosen the hose clamps and remove both hoses. 3. Unscrew the mounting nuts and...
Removal 1. Remove all liquid from the tank (for example, using a syringe). 2. Loosen the hose clamps and remove both hoses. 3. Unscrew the mounting nuts and...
Removal and installation the steering column
Remove the steering column only in the following cases: the steering column needs replacing; the steering and ignition lock housing needs to be replaced. If...
Remove the steering column only in the following cases: the steering column needs replacing; the steering and ignition lock housing needs to be replaced. If...
This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
See similar sections on Chevrolet cars:
Chassis: Steering Chevrolet Captiva 1 (2006-2018)
Chassis: Steering Chevrolet Cruze 1 (2008-2016)
Chassis: Steering Chevrolet Lacetti 1 (2002-2009)
Chassis: Steering Chevrolet Lanos T150 (2002-2009)
Chassis: Steering Chevrolet Niva 1 (2002-2016)
Chassis: Steering Chevrolet Tahoe 1 (1992-2000)
Chassis: Steering Chevrolet Lumina 1 (1989-1994)
Chassis: Steering Chevrolet Captiva 1 (2006-2018)
Chassis: Steering Chevrolet Cruze 1 (2008-2016)
Chassis: Steering Chevrolet Lacetti 1 (2002-2009)
Chassis: Steering Chevrolet Lanos T150 (2002-2009)
Chassis: Steering Chevrolet Niva 1 (2002-2016)
Chassis: Steering Chevrolet Tahoe 1 (1992-2000)
Chassis: Steering Chevrolet Lumina 1 (1989-1994)
Share information:
- General information
- Vehicle device
- User manual
- Main malfunctions
- Maintenance
- Power unit
- Engine
- Lubrication system
- Cooling system
- Supply system
- Exhaust system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Front wheel drives
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and trunk
- Security systems
- Electrical equipment
- Engine electrics
- Equipment and devices
- Heating and air conditioning
- Electrical circuits
- Manual
- Driver's workplace
- Salon equipment
- Vehicle characteristics
- Maintenance
- Engine 1.5 SOHC
- Engine repair
- Fuel supply system
- Control system
- Cooling system
- Engine 1.6 DOHC
- Engine repair
- Control system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Wheel drive
- Chassis
- Wheel suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- General information
- User manual
- Power unit
- Engine repair 1.5L SOHC
- Fuel system
- Control system
- Cooling system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Electrical circuits