Car front suspension Chevrolet Aveo 1 (T200)

The front wheel suspension of a Chevrolet Aveo is a MacPherson type suspension. In this section, a guide to the removal, installation and repair of front suspension elements.

Front wheel suspension device
The front suspension of this vehicle is a MacPherson type suspension, which includes the following elements: Stretcher (front axle beam) with longitudinally...

Removal and installation the front suspension shock absorber strut
Removal 1. Loosen the nuts that connect the upper part of the strut (assembly) to the vehicle. 2. Raise and secure the vehicle so that the body rests on...

Removal and installation of the front suspension steering knuckle
Removal 1. Remove the front wheels. 2. Remove the drive shaft mounting nut in the hub. 3. Disconnect the tie rod end from the steering knuckle. 4. Disconnect...

Removal and installation the front suspension arm
Removal 1. Place the vehicle on stands so that the wheels are raised off the floor. 2. Remove the wheel. 3. Disconnect the ball joint from the steering...

Removal and installation the front suspension subframe
Removal 1. Remove the front wheels. 2. Disconnect the ball joint from the lever. 3. Remove the stabilizer bar mounting nut (lower). 4. Remove the tie rod end....

Disassembly and assembly of the front wheel hub of the front suspension
Disassembly 1. Disconnect the drive shaft from the front wheel hub. 2. Remove the inner snap ring. 3. Remove the wheel hub. 4. Remove the outer snap ring. 5....

Removal and installation the front suspension spring
Disassembly 1. Remove the shock absorber struts. 2. Compress the front spring using the front spring compressor. 3. Unscrew the nut securing the upper spring...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: