Car cooling system Chevrolet Aveo 1.5 (T250)

Description of the cooling system
The cooling system ensures the proper temperature in all operating modes of the engine. The cooling system consists of a radiator and circulation system, fans,...

Expansion tank
The expansion tank is a clear plastic container similar to a washer reservoir. The expansion tank is connected to the radiator with one hose and to the cooling...

Removal coolant and filling the cooling system
Caution: Before removing the expansion tank cap, wait until the engine has cooled down to prevent the release of hot coolant or steam. 1. Place a container...

Thermostat — Removal, Checking and Installation
The thermostat controls the flow of coolant through the system and is housed in a housing and mounted on the front of the cylinder head To ensure rapid heating...

Coolant pump
The centrifugal coolant pump consists of an impeller, a drive shaft and a belt pulley. The coolant pump is installed in the front part of the cylinder block...

Radiator cooling fan
Caution: Always keep your hands, tools and clothing away from fan impellers before disconnecting the battery from ground to prevent injury (the fan motor may...

Radiator — removal and installation
The car is equipped with a lightweight aluminum tubular-fin radiator. There are three models of the radiator depending on the climatic conditions: light duty...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: