Internal elements of the car body Chevrolet Aveo 1 (T200)

Safety precautions when repairing the interior of the car
Attention: all work on removing and installing units, assemblies and parts of the car is recommended to be carried out with the battery disconnected. In case...

Removal and installation the instrument panel
Removal 1. Remove the driver airbag module from the steering wheel (for cars with airbag). 2. Remove the steering wheel from the steering column. 3. Remove the...

Interior trim
The interior trim is made of plastic and is secured with screws or plastic clips. Exhaust ventilation openings When all windows are closed and the ventilation...

Removal and installation the headlining
Removal 1. Remove the passenger assist handles. 2. Remove the clothes hook. 3. Remove the plastic clips attached to the headliner located on the driver's side....

Front seats
Removal 1. Loosen the screws securing the seat to the floor. 2. Disconnect the electrical connector under the driver's seat (if there is a belt pretensioner)....

Rear seats
Rear seat cushion Removal 1. Remove the screw at the base of the rear seat back. 2. Lift and remove the rear seat cushion. Backrest of the rear seat 3. Remove...

General description and operation of the security system
Attention: all work on removing and installing units, assemblies and parts of the vehicle is recommended to be carried out with the battery disconnected. Work...

Removal and installation front seat belts
Removal Loosen the anchor bolt securing the belt to the center pillar. Remove the lower and upper parts of the B-pillar trim. Loosen the mounting screws and...

Removal and installation rear seat belts
Open the luggage compartment. Remove the wheel trim in the luggage compartment. Loosen the anchor bolt securing the belt in the luggage compartment. Loosen the...

General description and operation of the airbag system
Airbags are part of the passive safety system along with seat belts. All people in the car must wear seat belts. As an option, seat belts can be equipped with...

Rotating contact articulation of airbags
This device is designed to provide contact in the airbag and horn switch circuits, the elements of which are located on the steering wheel. The peculiarity of...

Disabling and removing airbags
Turn the steering wheel to the straight-ahead position. Turn the ignition switch to the LOCK position and remove the key. Remove the airbag fuse F8 in the...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: