Car automatic transmission Chevrolet Aveo 2 (T300)

Features of the automatic transmission design
Chevrolet Aveo cars are equipped with a six-speed automatic transmission model Hydra-Matic 6T30/40/45/50 (figure 6.5 a and 6.5 b). The automatic transmission...

Checking the level, topping up and replacing the working fluid
You will need; working fluid for the gearbox, funnel, clean rag, wrench or socket head "11". The manufacturer provides for checking the level of the working...

Replacing automatic transmission seals
The procedure for replacing the inner CV joint seals of automatic and manual transmissions is the same and is shown above in this section using the example of...

Removal and installation of automatic transmission
You will need: 13 and 15 mm wrenches, 13 and 18 mm socket heads, a plastic spatula for removing pins, small and large flat-blade screwdrivers. The main faults...

Removal and installation the automatic transmission selector control linkage
You will need: a 10 mm socket head, pliers with thin bent jaws, a plastic spatula for removing pins or a screwdriver with a thin flat blade. 1. Disconnect the...

Replacing the automatic transmission control cable
You will need pliers with thin, curved jaws. 1. Open the hood (see " Hood "). 2. Loosen the clamp securing the end of the transmission control cable by...

Adjusting the automatic transmission control drive
No tools are required to adjust the automatic transmission control drive. 1. Set the gear selector lever to position "P". 2. Move the selector lever slightly...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: