Car cooling system Chevrolet Aveo 2 (T300)

Design features of the cooling system
Engine cooling system liquid (with forced circulation of liquid), sealed, with expansion tank. The system is filled with ethylene glycol based liquid...

Possible malfunctions of the cooling system, their causes and methods of elimination

Checking the cooling system hoses and connections
1. Open the hood and inspect the underhood space. When inspecting the engine, pay attention to the presence of coolant in the expansion tank, the integrity of...

Replacing the coolant
You will need: a flat-blade screwdriver, coolant, a clean wiping cloth, a container of at least 10 liters for draining the coolant, and pliers. According to...

Removal and installation of the electric fan of the radiator of the engine cooling system in assembly with the casing
You will need: a 10 mm wrench, a 15 mm socket head. 1. Disconnect the wire from the negative terminal of the battery. 2. Remove the expansion tank " Removal...
There is 1 comment

Replacing the cooling system radiator
You will need: a 10 mm wrench, 8 mm and 15 mm socket heads, sliding pliers or combination pliers, and a flat-blade screwdriver. 1. Disconnect the wire from the...

Removal and installation the expansion tank
You will need: a 10 mm wrench, pliers, a syringe or a rubber bulb. 1. Use a syringe or rubber bulb to pump out the liquid from the expansion tank. 2. Loosen...

Replacing the water pump
You will need: 13 mm keys, TORX T30, TORX T45, TORX E10 socket head, sliding pliers or combination pliers. Remove the pump for replacement if there is a...

Removal and installation the thermostat
You will need: TORX E10 socket head, sliding pliers. The need to replace the thermostat may arise when the engine temperature is unstable: overheating or...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: