Technical characteristics of the cooling system Technical characteristics of the cooling system Application Description Unit Standard Cooling system Type of cooling - At high pressure Coolant Type - Dexcool...
Location of cooling system components Radiator and fan 1. Upper radiator bracket 2. Lower radiator shock absorber 3. Radiator 4. Main cooling system fan 5. Auxiliary cooling fan 6. Main cooling fan...
Cooling system diagnostics Checking the Thermostat 1. Remove the thermostat from the car. Follow the step "Thermostat" in this section. 2. Make sure the valve spring is compressed when...
Draining and filling the cooling system Important: The vehicle's cooling system is designed to use either Dex-cool coolant, which is red, or silicate-based coolant, which is blue. These two types of...
Removal and installation the thermostat Removal procedure Caution! To prevent injury, do not remove the expansion tank cap when the engine and radiator are hot, as heat maintains pressure in the...
Removal and installation the water pump Removal procedure 1. Allow the engine to cool to ambient temperature (less than 50°C), then remove the coolant filler cap. 2. Drain the coolant. Follow step...
Water outlet channel Removal procedure 1. Loosen the clamp and disconnect the upper heater hose. 2. Loosen the clamp and disconnect the water hose to the expansion tank. 3. Remove...
Cooling system fan Removal procedure 1. Disconnect the negative battery cable. 2. Remove the decorative engine cover. See Part 1C2, Engine Mechanical - - HFV6 3.2L. 3. Remove the...
Expansion tank Removal procedure Caution! To prevent injury, do not remove the expansion tank cap when the engine and radiator are hot, as heat maintains pressure in the...
Removal and installation the radiator Removal procedure 1. Disconnect the negative battery cable. 2. Drain the coolant from the engine cooling system. Follow step "Draining and filling the cooling...