Vehicle heating and ventilation system Chevrolet Captiva 1

General description and operation of the heating and ventilation system
The basic heating system is designed for heating, ventilation, heating the windshield to remove moisture and frost, eliminating fogging of the side windows,...

Basic and installation diagrams of heating and ventilation
Schemes without air conditioning Air flow distribution - typical Air flow distribution with rear heating channel

Diagnostics of heating system faults
Insufficient heating of the air in the cabin or windshield Warning! When heated, the pressure in the cooling system increases. Removing the expansion tank cap...

Control unit — removal and installation
Removal procedure 1. Disconnect the negative battery cable. 2. Remove the audio system trim panel. See section 9F, "Audio Systems". 3. Remove the four control...

Electric fan of the heating system
Removal procedure 1. Disconnect the negative battery cable. 2. Remove the glove box. See section 9E, "Instruments/Driver Information System". 3. Remove the top...

High speed fan relay
Removal procedure 1. Disconnect the negative battery cable. 2. The relay is located in front of the electric fan. 3. Remove the lower glove box panel cover....

Heating Fan Resistor
Removal procedure 1. Disconnect the negative battery cable. 2. Remove the lower glove box panel cover. See section 9E, "Instruments/Driver Information System"....

Heater Hoses
Removal procedure 1. Partially drain the cooling system. 2. Raise and secure the vehicle. 3. Compress and push back the two spring clamps on the heater hoses...

Heater core
Removal procedure 1. Remove the instrument panel from the vehicle. See section 9E, "Instruments/Driver Information System". 2. Remove the air conditioning unit...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: