You will need: flat blade screwdriver, wrench «at 15».
1. Remove the hood seal from the flanging of the bulkhead shield.
2. Using a screwdriver, pull out the latches of the three clips securing the right side of the grille (the leftmost piston simultaneously secures the left and right parts of the air intake duct grille)...
3.... and remove the caps.
4. Remove the right side of the grille.
5. Remove the levers from the axes of the wiper trapezoid leashes (see «Replacing Windshield Wiper Arms»).
6. Pry off the retainers of the caps for fastening the grille of the air intake box...
7.... and pull out the clips of the two clips securing the left side of the grille.
8. Remove the caps.
9. Remove the left side of the air intake grille.
10. Install the air intake grille and all removed parts in the reverse order of removal.