We remove the fog lights of cars with sedan and station wagon bodies from below. Fog lights of a car with a hatchback body can be replaced in two ways: from above - from the engine compartment or from below the car. We carry out the work on the left fog light, the right headlight is removed in the same way.
To remove the fog light of a sedan or station wagon, remove two pins and unscrew four screws (same as when replacing a lamp)…
…and bend back the front part of the fender liner.
Using a Phillips screwdriver, unscrew the two screws securing the headlight on the right side..
…and one screw on the left side.
We remove the fog light with the bracket.
After pressing the block lock, we disconnect the block of wires from the headlight bulb.
We pry it off with a screwdriver..
…and we take out the headlight axis.
We remove the second headlight axis in the same way.
Using a Phillips screwdriver, unscrew the adjustment screw..
…and remove the headlight from the bracket.
We install the headlight in the reverse order.
When removing the fog light from below on a hatchback car, remove two pins and unscrew four screws (same as when replacing a lamp), we bend back the front part of the fender liner and disconnect the wiring block from the headlight bulb.
Using a 10 mm socket head, unscrew two nuts…
…and remove the headlight with the bracket.
We remove the headlight from the bracket in the same way as on a sedan.
When dismantling the fog light, remove the headlight from above and disconnect the wiring block from the fog light bulb or take out the bulb.
Using a 10 mm spanner, unscrew the two nuts and remove the headlight with the bracket.
We remove the headlight from the bracket.
We install the headlight in the reverse order.
After installing the headlight, we adjust the direction of the headlight beam..
…turning the adjustment screw with a Phillips screwdriver.
(The article was borrowed from the website: «CHEVYMAN.RU»)