Adjusting the position of the brake light switch (Chevrolet Niva 1)

The adjustment is carried out by moving the switch 7 (figure 6-3) brake light with nut 6 released. Install the switch so that its buffer is located relative to the brake pedal at a distance of 7.5 + 0.5 mm. In this position of the switch, tighten nut 6.

Figure 6-3. Brake drive:
1 - tank;
2 - vacuum booster;
3 - pusher;
4 - Brake pedal bracket;
5 - brake light switch buffer;
6 - brake light mounting nut;
7 - brake light switch;
8 - brake pedal.

(The original material is located on the website: «chevyman.ru»)

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Niva 1: Brake system

Checking the performance of the vacuum booster
Checking pipelines and connections
Possible malfunctions, their causes and methods of elimination
The structure of the braking system

Adjusting the parking brake
Checking the performance of the pressure regulator
Adjusting the pressure regulator drive
Removal air from the hydraulic drive
Clutch and brake pedal bracket