Location of switches on the center console: 1 - Tail light fog lamp switch; 2 - hazard warning switch; 3 — rear window heating switch
Tail light fog lamp switch. When you press the switch button, the tail light fog lamp is turned on, and the indicator built into the switch button lights up, and the corresponding indicator in the instrument cluster lights up. When the lamp is turned on, the low (high) beam headlights must be on.
The light of the fog lamp in the rear lamp during the dark can blind drivers of cars moving in the rear. Therefore, turn on the fog lamp in the rear lamp only in conditions of poor visibility.
Location of front door power window switches on the driver's door: 1 — Driver's door window switch button; 2 — Front right door window lift switch button
Hazard warning light switch. To turn on the hazard warning light, press the switch button. All turn signals and their indicators in the instrument cluster start flashing. The hazard warning light does not operate depending on the position of the key in the ignition or whether the turn signal is on. To turn off the hazard warning light, press the switch button again.
Rear window heating switch. When you press the switch button, the rear window heating element is turned on, and the indicator built into the switch button lights up, and the corresponding indicator in the instrument cluster lights up. The rear window heating can only be turned on when the ignition is on, when the ignition key is in the "ON" position. To turn off the rear window heating, press the switch button again.
Location of the front right door power window switch
Front door electric window switches. The car is equipped with front electric windows and rear manual windows. The electric windows can only be used when the ignition is on. The electric windows of both front doors can be controlled from the driver's seat. To lower the front door window, press the corresponding switch located in the door armrest and hold it until the window reaches the desired position. To raise the window completely or to a certain height, pry up the button and hold it until the window reaches the desired position.