Checking the technical condition (Chevrolet Niva 1)

Check the condition of the parts according to the requirements given in the subsection "Rear axle", also make sure that:

• the ball bearing of the inner joint housing is not worn or damaged (if the radial clearance in the bearing exceeds 0.05 mm, replace the bearing);
• the inner hinge housing is not deformed and the seats are not damaged;
• there are no burrs or dents in the grooves of the inner hinge housing;
• there is no wear or cracks on the crankcase mounting surfaces.

Replace worn and damaged parts with new ones.

(The article was reprinted from the website: CHEVYMAN.RU)