Remove the door trim (see Removal the rear door trim).
Using a Phillips screwdriver, unscrew the two screws securing the armrest trim bracket.
We remove the moisture-proof film from the inner door panel.
Using a Phillips screwdriver, unscrew the three screws securing the intermediate door trim…
…and remove the cover.
We remove the outer seal.
We remove the glass seal from the guide (the operation is performed with the glass down).
We remove the seal up to half of the front frame.
We unscrew the lower and upper guide mounting bolts and move the upper end of the guide out of the window opening.
Using a Phillips screwdriver, unscrew the two screws that secure the glass pins to the slider.
We lift the glass and take it out of the door.
There are two holes in the lower part of the glass for installing plastic pins
We install the rear door glass in the reverse order.