The work is shown on the driver's door.
The electric window mechanism of the right front door is removed in the same way.
Remove the front door trim (see Removal the front door trim) and a protective film (see Removal the front door glass).
We unscrew the screws that secure the glass to the slider (see Removal the front door glass).
We lift the glass and attach it to the upper door frame using tape or insulating tape.
By pressing the connector lock, we disconnect the connector block of the electric motor of the gear motor from the connector block of the switch unit.
Using a 10 mm socket, unscrew the four nuts securing the slider guide rail and the three nuts securing the window lifter motor-reducer.
We remove the electric window mechanism through a technological hole in the inner door panel.
We install the front door electric window mechanism in the reverse order.