Remove the bumper mudguard (see Removal mudguards).
We remove the headlights (Removal the headlight) and disconnect the wiring harness connectors from the fog lights (see Removal the fog light).
Unscrew three screws on each side of the car that secure the front wheel arch liners to the bumper (see Removal mudguards and front wheel arch liners).
Using a Phillips screwdriver, unscrew the screw securing the bumper to the front wing bracket.
Using a 10 mm open-end wrench, unscrew the bolt securing the bumper to the body bracket.
We perform similar operations on the other side of the car.
Using a 12 mm socket head, unscrew the bolt…
… and two nuts securing the bumper bracket to the body.
We perform similar operations on the other side of the car.
We move the bumper away.
Disconnect the fog lights from the bumper (see Removal the fog light).
To remove the front bumper energy absorbing beam…
…use a Phillips screwdriver to unscrew the screw of the piston that secures the energy-absorbing beam frame to the bumper…
… and we remove the piston.
Similarly, we remove the remaining 8 pins that secure the energy-absorbing beam frame to the bumper.
We detach the frame from the bumper.
We remove the energy-absorbing beam.
We assemble and install the front bumper in the reverse order.