Replacing the hazard warning switch (Chevrolet Cruze J300)

You will need: flat-head and Phillips-head screwdrivers.

1. Disconnect the wire from the negative terminal of the battery.



2. Remove the heating, air conditioning and ventilation control unit (see "Removal and installation the control unit for the heating, air conditioning and ventilation system").



3. Disconnect the wiring harness connector from the hazard warning switch.



4. Loosen the mounting screws and remove the hazard warning switch.

5. Install the switch in the reverse order of removal.

The text of the article was obtained from the website «ChevyMan.ru»