Note: Shown is the removal of the right headlight. The left headlight is removed in a similar manner.
1. Disconnect the wire from the negative terminal of the battery.
2. Remove the front bumper (see "Removal and installation the front bumper").
3. Squeeze the latch...
4. ...and disconnect the wiring harness connector from the front turn signal bulb socket.
5. Disconnect the wiring harness connector from the parking light bulb socket.
6. Use a screwdriver to pry...
7. ...and remove the retainer of the low and high beam lamp wiring harness connector.
8. Disconnect the wiring harness connector from the low and high beam lamp.
9. Remove the two upper headlight mounting bolts.
10. Remove one lower headlight mounting bolt.
11. Remove the headlight assembly from the vehicle by pulling it forward.
12. Install the headlight in the reverse order of removal.