Front seats
Removal
1. Disconnect the negative battery cable - the driver has electrical controls (see note at the beginning of this chapter).
2. Disconnect the electrical connectors and the fuel filler neck release cable located under the driver's seat.
3. Remove the rear nuts from the seat rails (see illustration).
23.3. Unscrew the rear nuts (indicated by arrows)
4. Unscrew the front nuts and remove the seat.
Installation
5. Installation is carried out in reverse order. Tighten the seat mounting nuts to the torque specified in technical conditions of this chapter.
Second and third rows of seats
Note: Remove the second row before removing the third row seats.
Removal
6. Remove the hole plugs.
7. Press the backs forward as far as possible.
8. Fold the seat forward (see illustrations).
23.8a. Pull the rear handle up and... |
23.8b....turn the seat up and forward |
9. Disconnect the front handle and release the seat (see illustration).
23.9 Pull the front bracket up to release the locking hooks and remove the seat
Installation
10. Installation is carried out in reverse order. Make sure the seats are secured to all four studs.