Doors, locks and windows of the car Chevrolet Lumina 1

Replacement of windshield and fixed windows
1. Replacing the windshield and fixed windows requires special materials and should be done in a workshop. 2. It is also better to entrust the removal of the...

Removal, installation and adjustment of the hood
Note: At least two people are needed to perform the hood removal and installation operations, as it is inconvenient to do it alone. Removal and installation 1....

Removal and installation the hood latch and cable
Removal 1. Disconnect the cable from the latch assembly by disengaging the hood release mechanism retainer (see illustration). 10.1. Unhook the cable from the...

Removal and installation interior door panels
Front door panel Removal 1. On vehicles equipped with power windows, disconnect the negative battery cable ( see note in section 1 ). 2. On vehicles with...

Removal and installation the side panel
1. Disconnect the cable from the negative terminal of the battery ( see note in section 1 ). 2. To remove the upholstery, proceed in accordance with the...

Removal and installation the outside mirror
Removal 1. Disconnect the cable from the negative terminal of the battery ( see note at the beginning of this chapter ) and remove the front door panel ( see...

Removal and installation the front door
1. If the door is equipped with an electric drive (windows and central locking) ( see note at the beginning of this chapter ), disconnect the wire from the...

Removal and installation a sliding door
Removal 1. Disconnect the cable from the negative terminal of the battery ( see note in section 1 ). 2. Remove the door panel ( see section 11 ). 3. Open the...

Removal and installation the rear door
Note: The rear door is heavy, so at least two people will be required to perform these operations. Removal 1. Disconnect the cable from the negative terminal...

Replacing the gas spring
Note: The rear door is heavy, so at least two people will be required to perform these operations. Removal 1. Removal of the gas spring is shown in...

Removal and installation of door locks and handles
Front door Inner handle 1. Raise the glass all the way up and remove the inner door panel ( see section 11 ). 2. Disconnect the lock rod from the handle. 3....

Removal and installation front door glass
Note: When performing this operation, you must wear protective glasses and gloves. 1. If the glass being replaced is cracked, tape it together to hold all the...

Removal and installation the front door window regulator
Removal 1. If the door is equipped with an electric window and central locking ( see note at the beginning of this chapter ), disconnect the wire from the...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: