Withdrawal
1. Disconnect the cable from the negative battery terminal (see note in section 1).
2. Remove the door panel (see section 11).
3. Slightly open the door and support it on jacks or bars covered with fabric so as not to damage the paintwork.
4. Disconnect the cable under the roller bottom bracket and remove the cable fixing screw.
5. Remove roller axle (see illustrations).
15.5a. Push in the locking tabs (paws) (indicated by arrows)... | 15.5b.... with pliers and knock out the locking pin with a punch |
6. Have a helper hold the door steady while you remove the top roller bracket from the door (see illustration).
15.6. Top roller bracket bolts inserted into door frame (indicated by arrows)
7. Turn away the bottom bolts of fastening of an arm of a roller and remove a door.
Installation
8. Installation is carried out in the reverse order. Be sure to tighten all bolts securely.