Car suspension repair Chevrolet Orlando 1

Car shock absorbers — design description
A shock absorber is a vehicle suspension element designed to dampen suspension vibrations that occur as a result of hitting an uneven road surface. Shock...

Checking the technical condition of shock absorbers
Checking the technical condition of the shock absorbers must be carried out in accordance with the maintenance plan and it is advisable to combine it with a...

Removal and installation the rear shock absorber
The necessity of performing this operation should be determined during the inspection of their technical condition. Warning: Shock absorbers should be replaced...

Removal and installation the front shock absorber
The front shock absorbers are installed in the housing of the front suspension struts. Therefore, to replace them, it is necessary to remove the front...

Rear suspension
The rear suspension of the car is semi-independent, made on an elastic beam with longitudinal levers, with coil springs and telescopic hydraulic shock...

Front suspension — design and testing
The front suspension is independent, with a telescopic shock absorber strut, one wishbone on each side and a torsion-type anti-roll bar. The lever is attached...

Replacing rear and front suspension springs
The car's front and rear suspensions are equipped with coil springs. With prolonged use of the car, the springs lose their original rigidity and sag. If...

Front suspension arm
The front suspension arm is attached to the front subframe on one side via silent blocks and to the steering knuckle on the other via a ball joint. The ball...

Stabilizer bar
The front suspension anti-roll bar consists of a round steel rod and two struts. The stabilizer bar is secured via rubber cushions on the front subframe, the...

Front suspension strut
The front suspension strut is an assembly unit consisting of a shock absorber spring, upper support and spring support cups. We remove the front suspension...

Wheel alignment angles
To ensure correct rolling of the vehicle wheels, taking into account the operation of the suspension and steering, the suspension elements must be installed in...

Chassis — design description
The chassis is responsible for the stability of the car on the road, its maneuverability, smoothness of the ride and, therefore, safety. The chassis consists...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: