Internal elements of the car body Chevrolet Lumina 1

Removal and installation the steering column cover
1. Remove the soundproofing panel from the driver's side ( see section 25 ). 2. Remove the three screws at the bottom edge of the casing. 3. To release the...

Removal and installation the front panel
Top panel Removal 1. To remove the top panel, follow the steps shown in Illustrations 22.1a-d. 22.1a. Using a small screwdriver, carefully remove the small...

Removal and installation seats
Front seats Removal 1. Disconnect the negative battery cable - the driver has electrical controls ( see note at the beginning of this chapter ). 2. Disconnect...

Removal and installation the ashtray (cars produced in 1990-1992)
1. Disconnect the battery ( see note at the beginning of this chapter ). 2. Remove the screws securing the crossbar to the passenger side and driver side panel...

Removal and installation the console (cars produced since 1993)
1. Disconnect the cable from the negative terminal of the battery. 2. Loosen the bolts securing the steering column cover and remove the cover from the clips....

Removal and installation of soundproofing panels
Soundproofing panel on the driver's side 1. Unscrew the nuts of the lower soundproofing panel, the bolts connecting the panel to the lower trim panel (see...

Removal and installation the glove box
1. Disconnect the cable from the negative terminal of the battery ( see note at the beginning of this chapter ). 2. Remove the soundproofing panel from the...

Removal and installation the audio system, air conditioner and heater panel
1. Remove the steering column cover ( see section 21 ) and open the glove compartment. 2. Remove the two bolts on the top of the panel, located on the...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: