2. Overcoming the resistance of the four clamps, remove the filler pipe hatch cover together with the casing and the electric drive of the lock.
3. Press the locking tab of the electric lock drive wiring harness connector...
4. ...and disconnect the connector.
5. Disconnect the wire harness holder from the casing bracket...
6. ...and remove the filler pipe hatch cover assembled with the casing and electric drive.
7. Press the latch...
8. ...and remove the electric drive of the fuel tank filler pipe hatch lock.
9. Install the fuel tank filler cap and all removed parts in the reverse order of removal.