1. Pry it off with a screwdriver.
2. Remove the decorative cover of the inner handle of the lock.
Helpful Hint: To avoid scratching the parts, wrap the tip of the screwdriver with electrical tape.
3. Remove the screw securing the rear door trim.
4. Remove the screw securing the door trim to the armrest handle.
5. Press the window lift handle socket towards the door trim and remove the spring clip of the handle through the resulting gap, prying it up with a screwdriver...
6. ...then remove the window lift handle and its socket.
7. Overcoming the force of the plastic clips, separate the trim from the rear door panel.
8. Using a screwdriver, pry...
9. ... remove the cable sheath end from the inner handle housing holder.
10. Disconnect the cable end from the inner handle lever...
11. ...and remove the rear door trim.
Door trim (view from the back side) attached to the door panel with eight plastic pins.
Replace damaged pins with new ones by removing them from the trim brackets.
12. Remove the two screws securing the armrest bracket to the door panel...
13. ...and remove the bracket.
14. Peel off the moisture-proof film from the door panel.
15. Install the rear door trim and all removed parts in the reverse order of removal.
[The original text can be found on the website: «CHEVYMAN»]