Replacing the inner handle of the front door lock actuator (Chevrolet Cruze J300)

You will need: TORX T20 key, flat-blade screwdriver.

1. Remove the front door trim (see "Removal and installation the front door trim").

2. Use a screwdriver to press the fasteners securing the inner handle to the door trim...

3. ...and remove the inner handle of the front door lock drive.

4. Install the inner handle and all removed parts in the reverse order of removal.

[The text of the article was obtained from the website «ChevyMan»]

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Cruze 1: Doors, covers and windows

Replacing the front door lock
Replacing the front door outer handle
Replacing the front door window regulator
Front door glass replacement
Removal and installation the front door trim

Removal and installation the front door
Replacing the front door opening limiter
Removal and installation the rear door trim
Rear door glass replacement
Replacing the rear door window regulator

See similar articles on the topic of Chevrolet cars:
Replacing the inner handle of the front door lock actuator Chevrolet Aveo T300 (2012-2018)
Front door lock Chevrolet Captiva 1 (2006-2018)
Removal the lock cylinder and the outer handle of the front door Chevrolet Lacetti 1 (2002-2009)
Removal the lock, lock cylinder mechanism, outer and inner front door handles Chevrolet Lanos T150 (2002-2009)
Adjusting the front door lock Chevrolet Niva 1 (2002-2016)
Door Lock, Drum Lock Switch and Handle — Removal and Installation Chevrolet Tahoe 1 (1992-2000)
Latch, Lock Cylinder and Door Handle — Removal and Installation Chevrolet Trailblazer 1 (2001-2008, petrol)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet