1. Remove the front door trim and moisture-proof film (ref. "Removal and installation the front door trim").
2. Install the glass so that the glass fastening nuts in the slider housings are visible in the door panel holes and accessible for unscrewing.
3. Loosen the two nuts securing the glass to the window regulator slider housings.
This is how the glass fastening nuts are located in the window lifter slider housings.
4. Carefully lower the glass down.
5. Remove the seal from the guide.
6. Under the seal, unscrew the three screws securing the guide to the door...
7. ...and remove the guide.
8. Remove the glass from the door by pulling it upwards and turning it in the door opening.
9. Install the front door panel and all removed parts in the reverse order of removal.
The original material is located on the website: CHEVYMAN.RU