Remove the front door trim and moisture-proof film.
2. Use a screwdriver to pry...
3. ...and remove the decorative plug.
4. While holding the outside handle in the door opening position, loosen the lock cylinder mounting screw...
5. ...and remove the lock cylinder from the door panel, overcoming the resistance of the holders.
6. Pull the handle back and remove it.
7. Remove the screw securing the frame of the outer handle of the front door.
8. Fold back the outer handle rod retainer and disconnect the rod from the door lock lever.
9. Lower the outer handle frame down into the door cavity and disconnect the rod from the lock cylinder lever.
10. Remove the outer handle frame by pulling it out through the access hole in the door panel.
11. Install the outer handle and all removed parts in the reverse order of removal.