Door lock
1. Remove the door trim panel.
2. Loosen the screws of the door frame cover and tilt it at the top.
3. Disconnect the traction from the lock.
4. Loosen the lock mounting screws and remove the lock from inside the door (see photo).
5. Installation is carried out in reverse order.
Interior door handle
6. Remove the door trim panel and water shield.
7. Drill out the rivets from the inner body of the handle and remove the handle (see photo).
8. Disconnect the traction handle from the handle.
9. Installation is carried out in reverse order.
Drum lock switch
10. Remove the door trim panel and water shield.
11. Remove the door frame cover with the window regulator.
12. Disconnect the rods from the handle and the drum switch of the lock.
13. Loosen the handle mounting bolts (see photo).
14. Remove the drum lock switch from the handle housing.
15. Remove the handle.
16. Installation is carried out in reverse order.
[The article was borrowed from the website: «chevyman.ru»]