Internal elements of the car body Chevrolet Tahoe 2

Instrument cluster amplifier
Removal Caution: Please read the precautions when working with the passive restraint system. 1. Remove the instrument panel trim. 2. If present, remove the...

Instrument cluster amplifier bracket
Removal 1. Remove the instrument panel amplifier. 2. Remove the upper instrument panel brackets. Tightening torque 2 N·m. 3. Disconnect all wiring connectors...

Lower instrument panel trim
Removal 1. Remove the instrument panel bezel. 2. If installed, remove the center console. 3. Open the glove compartment door. 4. Remove the bolts securing the...

Instrument cluster — removal and installation
Removal 1. Remove the instrument cluster trim bezel. 2. Loosen the instrument cluster mounting screws. 3. Remove the instrument cluster (2) by tilting its...

Knee support — removal and installation
Removal 1. Remove the instrument cluster trim bezel. 2. Loosen the knee support mounting screws. 3. Pull the stop until it comes out of the locks, remove the...

Upper instrument panel trim
Removal 1. If an air conditioner is installed, set the air distribution flap to the ventilation position. 2. Apply the parking brake. 3. Move the automatic...

Accessory Switch — Removal and Installation
Removal 1. Remove the instrument panel bezel. 2. Pull the accessory switch out of the latches. 3. Disconnect the switch wiring connector. 4. Remove the switch....

Floor console upper facet
Removal 1. Remove the instrument panel bezel. 2. Insert a flat tool between the facet and the console. Standard execution "Deluxe" version 3. Pull the bezel...

Dashboard facet
Removal 1. Apply the parking brake. 2. Move the automatic transmission selector lever all the way down to the position where the last gear is engaged. 3. Lower...

Floor console — removal and installation
Removal 1. Remove both front seats. 2. Remove the upper console bezel. 3. Remove the cup holder. 4. Loosen the screws (1) securing the console to the...

Glove compartment door
Removal 1. Close the glove compartment door. 2. Drill out the rivets (2). 3. Loosen the screws (1) securing the door to the instrument panel frame. 4. Remove...

Floor console end panel
Removal 1. Remove the console pan. 2. Remove the rear cup holder from the end panel. 3. Unscrew the two mounting screws. 4. Unscrew the two upper mounting...

Windshield opening panel
Removal 1. Pull the panel parallel to the opening post until it is released from the clips. Installation 2. Installation is carried out in reverse order.

First pillar trim panel
Removal 1. Remove the front door sill trim panel. 2. Remove the first pillar trim panel. Installation 3. Installation is carried out in reverse order.

Center pillar trim panel
Removal 1. Remove the door sill trim panels. 2. Pull the pillar trim panel out until it releases from the clips. Installation 3. Installation is carried out in...

Third pillar trim panel
Removal 1. Remove the rear door sill trim panel. 2. Remove the cover of the lower bolt of the rear passenger seat belt, unscrew the bolt. Tightening torque 70...

Door sill trim panel
Removal 1. Use a screwdriver to release the threshold panel from the clips. Start from the edge of the door opening. Front door Back door Cargo compartment...

Rear Fender Trim Panel
Removal 1. Remove the left or right rear seat. 2. Remove the left or right rear corner panel. 3. Remove the 3rd pillar trim panel. 4. Remove the rear door sill...

Cargo compartment door panel
Removal 1. Remove the plastic clips in the area of the door glass lock. 2. Using a clip remover, release the door panel mounting clips. 3. Remove the panel....

Upper cargo door molding
Removal Avalanche/Escalade EXT 1. Remove the rear glass. 2. Remove the third pillar panels. 3. Remove the plastic clips (1) from the top molding. 4. Pull the...

Rear corner panel
Removal 1. Remove the cargo door upper molding. 2. Pull the top of the panel until the clips are released. 3. Pull the panel to the side until it releases from...

Upper console — removal and installation
Removal 1. Loosen the screws securing the console to the ceiling panel. Tightening torque 2 Nm. 2. Disconnect the wiring connectors. 3. Remove the upper...

Front of the ceiling panel
Caution: Do not repair or replace the energy absorbing material adhered to the ceiling panel or stud panels. If the material is damaged, replace the ceiling...

Back of the ceiling panel
Removal Caution: Do not repair or replace the energy absorbing material adhered to the ceiling panel or stud panels. If the material is damaged, replace the...

Front carpet — removal and installation
Removal 1. Remove the front seats. 2. Remove the rear seats. 3. Remove the front center seat. 4. If equipped, remove the center floor console. 5. Remove the...

Rear mat — removal and installation
Removal 1. Remove the rear seat. 2. Remove the rear door sill trim panels. 3. Remove the rear cargo door sill trim panels. 4. Remove the rear fender trim...

This section is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Tahoe 2 and 3 (2000-2014)