2. Remove the facing panel of a door. Disconnect all wire connectors that lead through the door opening.
3. Place a jack under the door, propping it up with a rag, or ask an assistant to hold the door.
4. On the side doors, compress and remove the door hinge spring using tool J-36604 or equivalent.
Attention! When removing the door, the spring may fly out, so cover it with a heavy rag.
5. On the side doors, remove the hinge stoppers. On all doors, knock out the hinge pins and carefully remove the door (see photo).
Attention! On the hinges of the doors of the cargo compartment, the limiters of the hinge axes are not provided.
6. If the door does not close properly after installation, then adjust the position of the latch by moving it in all directions (up, down and sideways), to ensure that the latch engages with the latch of the lock. To do this, loosen the door latch bolt and move the latch to the desired position.