Remove the radiator grille.
Unscrew four bolts 4 (figure 8-10) upper front bumper mount 3 and four nuts of the lower mount, unscrew screws 1 and 5 of the side mount.
Disconnect the wiring harness connectors from the fog lights.
Remove the front bumper.
Install the front bumper in reverse order.
Removing the rear bumper. Open the rear door of the car, remove the left trim of the arch and side.
Disconnect the license plate light harness connectors from the rear auxiliary wiring harness.
Unscrew bolts 7 (figure 8-10) around the perimeter of the rear bumper 8.
Unscrew four nuts 9. Unscrew four screws 5 and remove the bumper.
Install the rear bumper in reverse order.
Figure 8-10. Removing the bumpers:
1 - screw;
2 - front bumper beam;
3 - front bumper;
4 - bolt;
5 - side bumper mounting screw;
6 - rear bumper beam;
7 - rear bumper mounting bolts;
8 - rear bumper;
9 - nut.