Figure 8-11. Fastening the bumper to the upper front cross member:
1 - self-tapping screw.
Unscrew two bolts 1 (figure 8-12) bumper mounts (in the license plate area).
Figure 8-12. Fastening the bumper to the lower front cross member:
1 - bolt;
2 - chrome plated trim.
Unscrew two nuts 1 (figure 8-13) lower bumper mount.
Figure 8-13. Fastening the bumper to the lower front cross member (bottom view):
1 - nut.
Unscrew six screws 1 (figure 8-14) and two nuts 2 for fastening the protective cover, right/left, front wheel arch and remove the protective cover 3.
Figure 8-14. Fastening the bumper and protective cover of the right/left wheel arch:
1 - screws;
2 - nuts;
3 - protective cover.
Disconnect connector 1 (figure 8-15) front wiring harness from fog lights.
Figure 8-15. Location of fog lights right/left:
1 - harness block;
2 - fog light.
Unscrew one screw at a time 1 (figure 8-16) from the wheel arch side, fastening of linings 1 (figure 8-17) headlights.
Figure 8-16. Fastening the headlight cover to the bumper:
1 - screw.
Remove cover 1 (figure 8-17) headlights right and left, overcoming the resistance of double-sided adhesive tape.
Figure 8-17. Headlight cover:
1 - left headlight cover;
2 - headlight.
Unscrew two bolts 1 (figure 8-18) upper - side fastening of the bumper to the lower cross member of the body and remove bumper 2.
Figure 8-18. Side bumper mount:
1 - bolt;
2 - bumper.
Removing the front bumper beam.
Unscrew one screw at a time 1 (figure 8-19) side mounting of the bumper beam.
Figure 8-19. Side mounting of the front bumper beam:
1 - screw;
2 - front bumper beam.
Unscrew four nuts 1 (figure 8-20) fastenings of the front bumper beam and remove beam 2.
Figure 8-20. Fastening the front bumper beam:
1 - nut;
2 - front bumper beam.
[Information taken from the official website: «ChevyMan»]