Withdrawal
Disengage and disconnect covers 1 and 3 (fig 8-85) from the lining of the floor tunnel 5.
Unscrew handles 2 and 4 of the gearbox and transfer case.
Remove the handles of the gearbox and transfer case assembly with covers
Pic. 8-85. Gearbox and transfer case handles:
1 - cover;
2 - transfer box handle;
3 - case;
4 - gearbox handle;
5 - lining of the floor tunnel.
Installation
Install the gearbox and transfer case handles in the reverse order of removal.