Replacing additional generator diodes (Chevrolet Niva 1)

To replace, unsolder the leads of the damaged diode and carefully remove it from the plastic holder, avoiding sharp blows to the rectifier unit. Then clean the diode installation site from the remains of epoxy resin, install and solder the new diode.

Solder the diode lead with the color mark to the common bus. After soldering, glue the diode body to the holder with epoxy resin.

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Niva 1: Power devices

Replacing generator rotor bearings
Replacing the voltage regulator or generator brushes
Disassembling the generator
Removal and installation the generator
Checking the Generator Capacitor

Technical characteristics of the starter
Features of the starter device
Possible starter malfunctions, their causes and methods of elimination
Checking the starter on the stand
Removal and installation the starter