2. Disconnect the negative battery cable.
3. Remove the body dashboard support bracket. Before removing the instrument panel, please read its full description in Chapter 11. This procedure is quite labor-intensive, and a beginner may have some difficulties during its implementation. Perform the operations sufficiently to remove the instrument panel lower cover.
4. After removing the lower cover of the instrument panel, remove the left heater deflector.
5. Remove the transfer case control unit (the mounting bracket can be removed along with the block) and disconnect the electrical connector from it.
6. Installation is carried out in the reverse order of removal.
Note: The installation procedure can be simplified if you first connect the electrical connector to the unit and install the bracket. After this, you need to install the block together with the bracket.