Contents: Removal procedure ↧ Installation procedure ↧
Necessary equipment
Upholstery remover KM-475-B
Removal procedure
1. Disconnect the cable from the negative battery terminal.
2. Remove the instrument panel compartment, the lower cover of the instrument panel compartment, and the audio system.
3. Unscrew the screws and remove the cup holder and console cover.
4. Disconnect the electrical connector.
5. Remove the bolts from the floor console.
6. Remove the floor console.
7. Remove the screws from the front console bracket.
Installation procedure
1. Connect the electrical connectors.
2. Install the front console bracket and tighten the screws.
Tighten
Tighten the front console bracket screws to 8 Nm (71 lbs.in).
3. Install the front console using bolts.
Tighten
Tighten the floor console screws to 8 Nm (71 lbs.in).
4. Connect the electrical connectors.
5. Install the cup holder and console cover.
6. Install the instrument panel compartment, the lower cover of the instrument panel compartment, and the audio system.
7. Connect the cable to the negative terminal of the battery.