General technical characteristics of the engine (Chevrolet Captiva 1)

PROGRAM			Description
Engine power	Engine		4 cylinders (in-line)
	Cylinder diameter and piston stroke		87.5 x 100 mm (3.44 x 3.94 inches)
	Working volume		2.405 cm³ (147 inches³)
	Sequence of current distribution to spark plugs		1–3–4–2
	Compression ratio		9.6: 1
	Max power		100 kW (5000 rpm)
	Max. torque		220 Nm 2200 rpm
	Idle speed	Air conditioning system (ON/OFF.)	690 rpm
Engine parts	Ignition type		Direct Ignition System (DIS)
	Starter	Type	PG 260D (M/T, A/T)
		Capacity; Volume; Performance; Power; Working volume	1.4 kW (M/T, A/T)
	Spark plugs	Type	FLR8LDCU (Bosch)
		Cap	0.9~1.1 mm (0.035~0.043 in)
	Fuel injection type		Multipoint injector
	Fuel pump type		Pump with electric motor
	Fuel filter type		Cartridge
	Type of lubricant		With forced feed
	Oil pump type		Rotative (trochoid) pump
	Type of cooling		Forced water circulation
	Radiator type		With horizontal arrangement of tubes
	Water pump type		Centrifugal
	Thermostat type		With a sensitive element
	Battery	Type	MF
		Characteristic (V-Ah)	12V-60Ah
		Cold Cranking Current (CCA)	650
	Generator	Type	AD 237
		Characteristic (V-Ah)	14.6±0.25 V-120 Ah
	Motor oil	Type	API SL (ILSAC GF-III) sAE grade 5W-30 * Hot Zone: SAE 10W-30
		Engine dismantling	4.5 l (4.75 qt)
		Oil change (including oil filter)	4.5 l (4.75 qt)
		Oil change (turning off the oil filter)	4.3 l (4.54 qt)
	Coolant	Type	Dexcool/silicate based coolant
		Capacity; Volume; Performance; Power; Working volume	9 l (9.51 qt)
	Fuel tank capacity		65 l (17.2 gallons)

The article was checked: Vladimir Romannikov

Share information:

Captiva 1: Engine device

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet