Air filter element (Chevrolet Captiva 1)

Contents: Removal procedure ↧ Installation procedure ↧

Removal procedure

1. Loosen the clamp and disconnect the air cleaner outlet hose from the air cleaner housing.

2. Loosen the air filter element cover screws.

3. Remove the air filter element.

Installation procedure

1. Install the air filter element cover.

2. Tighten the air cleaner element cover screws.

Tighten

Tighten the air cleaner element cover screws to 2 N·m (18 lb-in.).

Tighten the air cleaner element cover screws to 2 N·m (18 lb-in.).

[The original article is on the website chevyman]

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Captiva 1: Engine repair

Air cleaner unit
Table of special tools

Cylinder head cover
Auxiliary drive belt
Cylinder head and gasket
Camshafts
Checking and adjusting the tension of the timing belt

See similar articles on the topic of Chevrolet cars:
Replacing the air filter element Chevrolet Aveo T300 (2012-2018)
Replacing the air filter element Chevrolet Cruze 1 (2008-2016)
Replacing the air filter element Chevrolet Lacetti 1 (2002-2009)
Replacing the air filter element Chevrolet Lanos T150 (2002-2009)
Air filter filter element Chevrolet Tahoe 2 and 3 (2000-2014)
Cleaning and replacing the air filter element Chevrolet Orlando 1 (2010-2018)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet

Captiva 1 (2006-2018)