General technical characteristics of the engine (Chevrolet Captiva 1)

Application			Description
Engine power	Engine		V6
	Cylinder diameter and piston stroke		89 x 85.6 mm (3.50 x 3.37 inches)
	Working volume		3.195 cm³ (94.97 in³)
	Sequence of current distribution to spark plugs		1–2-3-4-5-6
	Compression ratio		10,3: 1
	Max power		226.6 hp (169 kW) at 6600 rpm
	Max. torque		219.1 lb-ft (297 N·m) at 3200 rpm
	Idle speed	Air conditioning system (ON/OFF.)	690±25 rpm
Engine parts	Ignition type		Direct Ignition System (DIS)
	Starter	Type	PG 260D (M/T, A/T)
		Power	1.4 kW (M/T, A/T)
	Spark plugs	Type	HR7MPP302 (BOSCH)
		Gap	1.1 mm
	Fuel injector type		Solenoid
	Fuel pump type		Pump with electric motor
	Fuel filter type		Cartridge
	Type of lubricant		With forced feed
	Lubrication pump type		Trochoidal internal gear
	Type of cooling		Forced water circulation
	Radiator type		With horizontal arrangement of tubes
	Water pump type		Centrifugal
	Thermostat type		Wax ball
	Battery	Type	MF
		Characteristic (V-Ah)	12 - 70
		Cold Cranking Current (CCA)	770
	Generator	Type	AD 237
		Characteristic (B-A)	14,6±0,25 - 120
	Motor oil	Type	API SJ (ACEA A1) SAE grade 0W-30
		Oil change (including oil filter)	7.4 l
		Oil change (turning off the oil filter)	7.0 l
	Coolant	Type	Dexcool Coolant/Silicate Based
		Volume	10 l (10.57 quarts)
	Fuel tank capacity		65 l (17.2 gallons)

The article was checked: Vladimir Romannikov

Share information:

Captiva 1: Engine device

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet